USER AND INSTALLATION MANUAL - KACO new energy, Inc.
USER AND INSTALLATION MANUAL - KACO new energy, Inc.
USER AND INSTALLATION MANUAL - KACO new energy, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WARNING!<br />
Operating the Inverter if it’s damaged may cause severe injury from electrocution.<br />
The Inverter may only be used when it is functioning correctly.<br />
Regularly check the XP Inverter for visible damage and operate only if there is no visible damage.<br />
Ensure that all safety features are accessible at any time and that their correct operation is tested regularly.<br />
ATTENTION!<br />
The printed circuit board (PCB) components in the Inverter can be damaged by electrostatic discharge!<br />
When working on the Inverter and when handling the PCB components observe all ESD safety<br />
regulations. Discharge electrostatic charge by touching the grounded Inverter enclosure. Only then<br />
is it safe to touch any electronic components.<br />
Technical rules<br />
The installation must be in compliance with the local regulations and technical rules, in particular with regard to<br />
electrical connections. (National Electric Code NEC)<br />
The installer is responsible for knowing and understanding local standards and regulations as well as utility<br />
interconnection requirements.<br />
Page 10
Change language