USER AND INSTALLATION MANUAL - KACO new energy, Inc.
USER AND INSTALLATION MANUAL - KACO new energy, Inc.
USER AND INSTALLATION MANUAL - KACO new energy, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7. ELECTRICAL CONNECTION<br />
The electrical connections should only be made after the inverter has been installed in its final location. To<br />
complete the electrical connections, the AC and DC terminal connections must not be connected to any source<br />
of voltage. This will protect the installer from harm and ensure that the inverter is not accidentally activated.<br />
CAUTION!<br />
After the inverter has been installed in the fixed location, the electrical connection can be established<br />
Please be sure that both AC and DC side are disconnected from all voltage sources.<br />
Please be sure that the switches are locked out and switching-on unintentionally is not possible.<br />
NOTICE!<br />
The electronic printed circuit board components in the inverter can be damaged by static electricity.<br />
When handling the printed circuit boards, please follow ESD safety regulations.<br />
To prevent the damage from static electricity, touch the enclosure of the grounded inverter.<br />
Please go to the next step when you are sure it is safe.<br />
Page 26