download - Knoll

Ceiling infeeds
for Generation 3 panels
Equity
description type w d h pattern no. P1
Painted metal ceiling module - 120 length 4 1 1 /2 120 EE3CM41M $389. n/a n/a
4 1 1 /2 120 EE3CM49M 389. n/a n/a
4 1 1 /2 120 EE3CM61M 389. n/a n/a
4 1 1 /2 120 EE3CM64M 389. n/a n/a
4 1 1 /2 120 EE3CM81M 389. n/a n/a
add for
P2
add for
P3
Ceiling infeed harness - 19.5 length E-Series 10-wire EE1CH-10 357. n/a n/a
E-Series 8-wire EE1CH-8 292. n/a n/a
Order Code
Example: EE3CM61P, Y2
EE3 Equity electrical
Generation 3
CM Ceiling module
61 Height
P Painted/Plastic
Y2 Medium Grey (Slate)
trim
Specification Information
For ceiling infeed modules:
Specify trim (paint) color.
Fabric covered modules not
available.
Note:
‘‘E’’ Series and ‘‘O’’ Series electrical
components are not
interchangeable.
8-wire components listed work for
both 2+2 and 3+1 configurations.To
connect a metal ceiling infeed to a
corner or straight connection use an
adjustable angle connector or an
adjustable angle connector with
multi-height connector for a
three-way connection.
64
Application Notes
Ceiling infeed modules:
Electrical harnesses not included
with modules. Modules are hollow
to accommodate power and/or data
cables from source into systems
furniture.
With electrical harness installed,
infeed holds 35 cables.
Cables/conduit are laid into the
lower metal body by removal of the
front 1-1/2 wide access cover and
into the upper plastic extrusion by
separating the front edge of the
pliable tube. Infeed module is
attached to an available post
location of the appropriate height.
The module connot be used for
panel suppoet and there are no
‘‘hang on’ capabilities. Includes
escutcheon plate. Plate and plastic
tube are white to integrate with
standard ceiling color.
No ‘‘hang on’’ capabilities.
Module cannot be used for panel
support.
Painted metal module is 120 long
metal extrusion with attachment
hooks at proper height to attach to
appropriate height post. Infeed
holds 35 cables with electrial
harness installed.
Cables/conduit are laid into module
by removal of two-piece front 1-1/2
wide vertical access cover which
runs the length of the extrusion.
Includes escutcheon plate which is
white to integrate with ceiling. Tube
is trim colored to match system trim.
To connect a metal ceiling infeed to
a corner or a straight connection you
must use an adjustable angle
connector or adjustable angle
connector with a multi-height
connector.
= KnollNow