download - Knoll

‘‘E’’ Series electrical
Dedicated Neutral System
conduit jumper
description
nominal
length pattern no. list
Conduit jumper 126 EE1C126-(N3/N4)e $186.
132 EE1C132-(N3/N4)e 190.
144 EE1C144-(N3/N4)e 201.
Equity
Panels, Connections, Power and
Accessories
Terminal block (N3/N4) EE1TB-(N3/N4)e 44.
Duplex receptacle EE1RIIINe 28.
EE1RIINe 28.
EE1RINe 28.
EE1RIVNe 28.
Order Code
Specification Information
Application Notes
Example: EE1C30-N3
EE1C Conduit jumper
30 Length
N3 8-wire dedicated neutral
8-wire N3 = 2+1 system (2 hots and
2 neutrals sharing one ground, 1
isolated hot and 1 isolated neutral
on an isolated ground)
10-wire N4 = 2+2 system (2 hots
and 2 neutrals sharing one ground,
2 hots and 2 neutrals sharing
another ground)
Jumpers:
Transmit power circuits from one
panel mouted terminal block to
another. Can carry power through
panels where no terminal blocks are
installed. The length of the jumper
corresponds to the distance between
the terminal blocks.
To calculate the correct length:
1. Add widths of both panels
containing terminal blocks.
2. Divide by two.
3. Add width of any non-electrified
panels in-between.
The result is the correct jumper
length.
Example:
36+24=60
60÷2=30
30+48=78
Order EE1C78-N3
= KnollNow
69