download - Knoll

EW2 Worksurfaces
Rectangular 30 and 36 deep
Equity
description w d pattern no. list price
30D Rectangular 24 30 EW22430G $209.
30 30 EW23030G 222.
36 30 EW23630G 235.
42 30 EW24230G 277.
48 30 EW24830G 307.
54 30 EW25430G 387.
60 30 EW26030G 410.
66 30 EW26630G 444.
72 30 EW27230G 464.
78 30 EW27830G 479.
84 30 EW28430G 505.
90 30 EW29030G 529.
96 30 EW29630G 545.
102 30 EW210230G 606.
108 30 EW210830G 631.
114 30 EW211430G 657.
120 30 EW212030G 684.
36D Rectangular 48 36 EW24836G 457.
54 36 EW25436G 476.
60 36 EW26036G 495.
66 36 EW26636G 514.
72 36 EW27236G 534.
78 36 EW27836G 553.
84 36 EW28436G 572.
90 36 EW29036G 593.
96 36 EW29636G 613.
102 36 EW210236G 632.
108 36 EW210836G 657.
114 36 EW211436G 683.
120 36 EW212036G 711.
Order Code
Example: EW27230G, M95, D
EW2 Equity top only
72 Width in inches
30 Depth in inches
G w/grommets
M95 Grey Granite
D Dark Neutral edge
Specification Information
Specify surface and trim color. Any
support required must be ordered
separately (including floorstanding
pedestals, etc.).
Note:
If an edge grommet is not desired
remove the ‘‘G’’ and deduct $20.
Worksurface cable baskets may be
ordered separately.
88
Application Notes
Pattern numbers listed above are for
worksurface only. All support
hardware must be ordered
seperately. See page 81 for
Worksurface Loading and Support
Application Information.
36 deep top may not be used with
cantilevers. Must be mounted with
36 or longer stretcher rails. Use
pedestal or freestanding end panel
for intermediate support under 72
or larger worksurfaces (36 depth
only).
A center support must be used with
a54 wide or larger worksurface.
Note:
Extended one end add ‘‘E’’ and
$20. Extended both ends add
‘‘EE’’ and $40 (‘‘EE’’ not available
on 120.)