Pluto Safety PLC details - Products For Industry

– to supervise safety devices!
1
Light beams Light grids/curtains
devices
Sensors/
switches
Two-hand
controls
Emergency
stops
Strips
Mats
2
Most safety devices on the market can be connected directly
to Pluto units. By using dynamic signals with sensors
from Jokab Safety only one input is needed for category 4,
is also possible to connect up to 10 sensors in series to a
single input on Pluto according to category 4.
– to save on inputs!
Dynamic signals
1–10 doors with one Eden per door
category 4
Pluto
has inputs for static and
dynamic sensors. Several
sensors can be connected
to one dynamic input in
accordance with category 4.
For example non-contact Eden sensors, Spot light beams
and Tina emergency stop buttons can all be connected in
series to a single Pluto input. Even mechanical switches can
be connected to the 'dynamic' safety circuit using Jokab
that can be used as both inputs and outputs.
Dynamic signals
1-10 sensors
category 4
3
4
5
6
7
8
9
IO connections
both input and output at the same time (e.g. for a reset button with lamp
indication)
input/output
Two inputs
Static inputs (mechanical switches)
2 for each door = category 4
10
11
12
www.jokabsafety.com 2:3
13