Pluto Safety PLC details - Products For Industry
Pluto Safety PLC details - Products For Industry
Pluto Safety PLC details - Products For Industry
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Input connection<br />
<br />
short-circuits it is possible to use up to three different dynamic signals and static voltage (+24 V) to<br />
supply the inputs. The inputs are then programmed to only accept one of the signal types.<br />
<br />
thereby be able to detect a short-circuit between the channels.<br />
<br />
and the output of the sensor will be detected at the <strong>Pluto</strong> input. Category 4 can thus be achieved by using<br />
only one channel and one input.<br />
1<br />
2<br />
3<br />
Emergency<br />
stop with<br />
Tina<br />
Emergency<br />
stop with<br />
Tina<br />
Spot light<br />
beam<br />
Eden sensor<br />
4<br />
5<br />
6<br />
Two-channel system Single channel dynamic system, category 4<br />
<br />
Reset button that uses the combined input and output facility<br />
Resetting with a lamp<br />
input/output<br />
7<br />
8<br />
9<br />
(Current monitoring)<br />
24VDC<br />
<br />
A1<br />
X4<br />
10<br />
Both a lamp and a pushbutton can be connected to the same terminal. This function<br />
<br />
<br />
is intact. The lamp is only considered to be intact if sufficient current is being drawn from<br />
<br />
<br />
Examples of connector expansion<br />
11<br />
12<br />
www.jokabsafety.com 2:7<br />
13
Change language