Download the catalogue - legrand
Download the catalogue - legrand
Download the catalogue - legrand
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
pour grommets exemple : xxxxxxx<br />
xxxxxxxx<br />
grommets<br />
❋ Dimensions<br />
Ø144 mm<br />
Cat.No EG0010<br />
ø144 mm<br />
Ø232 mm<br />
Cat.No EG0055<br />
ø232 mm<br />
EG0055<br />
ø55 mm<br />
58 mm<br />
Technical caracteristics (p. 46)<br />
125 mm min.<br />
127 mm max.<br />
Floor panel cut-out diameter<br />
213 mm min.<br />
215 mm max.<br />
Floor panel cut-out diameter<br />
For simple access for services underfl oor to workstations of all kinds<br />
Conform to IEC 60670-23<br />
Accommodates all cable types and fl exible conduits up to Ø25 mm<br />
Pack. Cat.Nos Grommets<br />
Grommet for conduits and cables exit<br />
For integration in raised access fl oors<br />
1 EG0010 Ø144 mm<br />
1 EG0055 Ø232 mm<br />
❋ Installation principle<br />
A<br />
B<br />
Lift <strong>the</strong> handle and pull to remove<br />
<strong>the</strong> lid<br />
C<br />
Wing<br />
Push <strong>the</strong> grommet into <strong>the</strong><br />
raised fl oor tile aperture and<br />
push down<br />
Push down <strong>the</strong> spring loaded<br />
screws and rotate a quarter<br />
turn to fi x<br />
Ensure <strong>the</strong> wings are located<br />
under <strong>the</strong> fl oor panel<br />
For honeycombed fl oor<br />
panels one wing should face<br />
downwards and one wing<br />
should face upwards<br />
Cable access insert<br />
Drop cable access insert into<br />
<strong>the</strong> housing opening<br />
D<br />
E<br />
1<br />
2<br />
Slide lid into <strong>the</strong> lug holes<br />
Push down <strong>the</strong> lid to close<br />
If <strong>the</strong> grommet is not in use<br />
replace <strong>the</strong> cable access<br />
insert<br />
46