Download the catalogue - legrand

pour Intersoc exemple under : desk xxxxxxx modules
xxxxxxxx
IAB003A
IAB402A
IAB420A IAB405A IAB502A
IAB532A
IAC502A
IAB504A
IAC504A
IAC315A
IAB600A IAB201A IAB610A IAZ001A
Technical characteristics (p. 49)
Modular desk power system, modules simply push-fi t and lock together
All sockets are busbar interconnected, no terminals required
Conform to BS 7671: 2008 (IEE Wiring Regulations 17th Edition)
Pack Cat.Nos Pre-wired feed units
32 A in-feed modules
Mains connection via BS 1363 plug or tapp-off
connector for Electrak busbars
With additional external earth connections
With BS 1363 13 A fused plug
1 IAB003A With 1.5 mm² cable, length 3 m
1 IAB005A With 1.5 mm² cable, length 5 m
With tap-off connector for Electrak 28 standard
busbars
For direct connection on Electrak 28 busbar system
(p. 14)
1 IAF311A Unfused metal tap-off Cat.No YP5332
With 3 m cable and metallic fl exible
conduit
1 IAF312A Unfused metal tap-off Cat.No YP5532
With 5 m cable and metallic fl exible
conduit
1 IAF315A 13 A fused 543.7 metal tap-off Cat.No YP5327
With 3 m cable and metallic fl exible
conduit
1 IAF316A 13 A fused 543.7 metal tap-off Cat.No YP5527
With 5 m cable and metallic fl exible
conduit
With tap-off connector for Electrak 25 low noise
busbars
For direct connection on Electrak 25 busbar system
(p. 14)
1 IAC311A Unfused metal tap-off Cat.No JP2332
With 3 m cable and metallic fl exible
conduit
1 IAC312A Unfused metal tap-off Cat.No JP2532
With 5 m cable and metallic fl exible
conduit
1 IAC315A 13 A fused 543.7 metal tap-off Cat.No JP2327
With 3 m cable and metallic fl exible
conduit
1 IAC316A 13 A fused 543.7 metal tap-off Cat.No JP2527
With 5 m cable and metallic fl exible
conduit
Protection and switching modules
For the protection and switching of circuits from the
32 A In-feed modules where required
1 IAB402A With fuse and neon switch
1 IAB410A With 6 A MCB
1 IAB420A With 16 A MCB
1 IAB405A With 30 mA RCD
Pack Cat.Nos Socket modules
Can be connected to each other to give different
combinations of sockets
Individual fused socket modules can also be
fi tted directely on the 32 A feed units (no protection
and switching module required)
90° orientation socket outlets
2-socket modules
1 IAB502A 2 x 2P+E socket
1 IAB532A 2 x 2P+E socket fused at 3.15 A
1 IAC502A 2 x 2P+E socket for Electrak 25 low noise
busbar system
1 IAC532A 2 x 2P+E socket fused at 3.15 A
for Electrak 25 low noise busbar system
4-socket modules
1 IAB504A 4 x 2P+E socket
1 IAB534A 4 x 2P+E socket
fused at 3.15 A
1 IAC504A 4 x 2P+E socket for Electrak 25 low noise
busbar system
1 IAC534A 4 x 2P+E socket fused at 3.15 A
for Electrak 25 low noise busbar system
Interconnection modules
For interconnection between units within
the 32 A range of products
Rewirable interconnection
1 IAB600A Power out - male connector with cable
1 IAB201A Power in - female connector with cable
Pre-wired interconnection
Male and female connector for direct connection
between modules
With 1.5 mm² cable
1 IAB610A Length 1 m
1 IAB630A Length 3 m
End cap
To be fi xed at the end of module
1 IAZ001A Blank end cap
48