IR Interactive Whiteboard Manual - Qomo

More documents

Recommendations

Info

QOMO Hite Vision Interactive Whiteboard User Manual between the actual product and these descriptions. Table of Contents ATTENTION SYSTEM REQUIREMENTS ............................................................................. 3 HOW TO INSTALL HARDWARE ....................................................................................... 6 HOW TO INSTALL SOFTWARE ...................................................................................... 13 SPECIFICATIONS ........................................................................................... 25 © Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved 1
QOMO Hite Vision Interactive Whiteboard User Manual Attention • Do not expose this whiteboard to rain or moisture to reduce the risk of fire or electric shock. • Do not expose this whiteboard to fire, electric shock, or sunlight for long periods of time. • This device is heavy with a Net Weight over 15 kg (33 lbs). Use expansion bolts to securely mount the device to the wall. • When the projector and interactive whiteboard are used together, do not stare directly at the light from the projector. • This user manual is only applicable to IR interactive whiteboard products. • Only the matched pens from our company or human fingers can write or operate on the interactive whiteboard. • This product uses the IR annotation technology. Make sure the product will not contact with any other hard objects to avoid deformation of the board’s surface. • If the interactive whiteboard is connected with a wire, make sure the connection between this device and the computer is secure. It is recommended that the wires are hidden to avoid pulling and dragging the cables. • If the interactive whiteboard is connected with a wire, use the cables in the accessory box. Other cables might not be compatible with this product. • If the interactive whiteboard is connected by radio frequency, the distance between the receiver and interactive whiteboard must not exceed 15m (49 ft.). Avoid any obstacles which may shield the electromagnetic waves. • Do not touch, cut, or scratch the panel and frame with sharp or hard objects. Do not drill holes or nail in any place of the product since it will damage the device. © Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved 2
Page 1: QOMO Hite Vision Interactive Whiteb
Page 5 and 6: QOMO Hite Vision Interactive Whiteb
Page 27: QOMO Hite Vision Interactive Whiteb

IR Interactive Whiteboard Manual - Qomo

Create successful ePaper yourself

Delete template?

Save as template?