You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Locate <strong>Air</strong> Inlet Block off Assembly. Install<br />
over hole in inlet cowl as shown. Attach with<br />
(2) #10 x ¾ Tek screws.<br />
Locate the mounting location as shown and<br />
attach the ¼-20 J-clip supplied.<br />
Locate defrost / heat duct assembly and<br />
attach to the evaporator using (2) #10 x 5/8<br />
pan head philips screws.<br />
NOTE: Be sure that the s-clips are pushed<br />
over flange on evaporator.<br />
Install the Evaporator in vehicle.<br />
#10 x 5/8 Screws<br />
8