Planar UltraRes Series Manual
Planar UltraRes Series Manual
Planar UltraRes Series Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connections<br />
Connections<br />
Connecting AC Power<br />
In order to get your <strong>UltraRes</strong> display up and running, you need to make three main<br />
connections: AC power, the wired IR module and your sources.<br />
Using the supplied AC power cord, connect one end to a grounded outlet and the<br />
other to the AC power input next to the I/O panel the bottom of the <strong>UltraRes</strong> display.<br />
Connecting the Wired IR Module<br />
In order for the remote control to work, you need to connect the wired IR module to<br />
the display, also on the bottom of the I/O panel. Then place the IR receiver in the<br />
desired place on or near the display.<br />
30 <strong>Planar</strong> <strong>UltraRes</strong> User <strong>Manual</strong>
Change language