Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PowerLock<br />
Removal:<br />
1. Release clamping screws (1).<br />
2. Pull out profiled cutters.<br />
1<br />
DOKW0045<br />
Installation:<br />
1. Remove dirt and resin on clamping ledges and<br />
serrated back.<br />
2. Insert clamping ledge and profiled cutter.<br />
3. Mount setting device (2) on tool and axially press<br />
against shoulder.<br />
4. Axially position clamping ledge and profiled cutter<br />
against setting device and tension middle clamping<br />
screw with half the specified torque.<br />
5. When all cutters have been fixed in this way, remove<br />
setting device and tension all clamping screws to<br />
30 – 33 Nm, working from the inside outwards.<br />
Never tension the complete cutter groove in<br />
one operation, otherwise the tool could<br />
become deformed.<br />
Do not use damaged Allen keys or keys on<br />
which the hexagon head has become round,<br />
as this may result in damage to the clamping<br />
screws.<br />
2<br />
DOKW0046<br />
6. Check that cutters are correctly seated in the<br />
serration.<br />
7. Note the maximum cutter adjustment (a).<br />
a<br />
DOKW0084<br />
a = 4 spaces (6.4 mm)<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG <strong>AG</strong> <strong>Weinig</strong> <strong>Tools</strong> 2-7