Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Normal clamping<br />
3. Use two angled Allen keys (3) with shank to clamp<br />
the V-ledge and tighten the clamping screws<br />
simultaneously. Torque screws down to 25 Nm.<br />
Never tension the complete cutter groove in<br />
one operation, otherwise the tool could<br />
become deformed.<br />
Do not use damaged Allen keys or keys on<br />
which the hexagon head has become round,<br />
as this may result in damage to the clamping<br />
screws.<br />
3 3<br />
DOKW0056<br />
3.2.5 Technical data<br />
– Tool body of high-strength steel or aluminium<br />
– Fitted with 2 or 4 straight reversible cutters<br />
– Optionally fitted with HSS or carbide<br />
– Positive, form-fitting clamping of the cutters<br />
– Hardened clamping ledges with ground clamping<br />
area<br />
– Cutting angle: 12° / 27° / 35°<br />
– Cutter cutting circle dia. 125 or 140 mm<br />
– Max. speed n = 9,000 rpm<br />
Subject to change without notice!<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG <strong>AG</strong> <strong>Weinig</strong> <strong>Tools</strong> 3-5