Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Normal clamping<br />
3.4.6 Removing and fitting the cutters<br />
Removal:<br />
1. Clean the clamping screws in the cutterhead before<br />
removing the cutters.<br />
2. Undo the clamping screws on the cutterhead,<br />
working from the outside inwards.<br />
Planing knives have compression springs<br />
behind the cutters which press the cutter<br />
upwards.<br />
Care must be taken when undoing the last<br />
clamping screw, as the planing knife (1) may<br />
suddenly spring up out of the mount.<br />
3. Press against the planing knife with a piece of hard<br />
wood (2) when undoing the last clamping screw.<br />
4. Remove the cutter and clamping ledge.<br />
2<br />
1<br />
DOKW0036<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG <strong>AG</strong> <strong>Weinig</strong> <strong>Tools</strong> 3-13