Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Normal clamping<br />
3.3.4 Mechanical design of the tool<br />
Profile cutterhead with profiled cutters. Solid steel body.<br />
Robust, reliable construction for low-noise, vibrationfree<br />
operation.<br />
1 Body<br />
2 Clamping ledge<br />
3 Clamping screw<br />
4 Profiled cutter<br />
4 3 2 1<br />
DOKW0058<br />
Solid,<br />
with serrated back<br />
Tipped,<br />
with serrated back<br />
DoubleBack tip<br />
with carrier plate<br />
The clamping ledges are marked at the end in<br />
accordance with the profiled cutter thickness (in mm).<br />
The ledges are hardened, with ground clamping area.<br />
DOKW0026<br />
3.3.5 Removing and fitting the cutters<br />
Removal:<br />
1. Back off clamping screw (1).<br />
2. Release clamping ledge with striker (2).<br />
3. Pull out profiled cutter with striker (2).<br />
2<br />
1<br />
DOKW0059<br />
Installation:<br />
1. Remove dirt and resin on clamping ledges and<br />
serrated back.<br />
2. Insert clamping ledge and profiled cutter and clamp<br />
from both sides with clamping screw (1).<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG <strong>AG</strong> <strong>Weinig</strong> <strong>Tools</strong> 3-7
Change language