Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Normal clamping<br />
3.6.4 Mechanical design of the tool<br />
Profile cutterhead with profiled cutters. Solid steel body.<br />
Robust, reliable construction for low-noise, vibrationfree<br />
operation.<br />
4<br />
3<br />
1 Body<br />
2 Clamping ledge<br />
3 Clamping screw<br />
4 Profiled cutter<br />
1<br />
2<br />
DOKW0065<br />
Solid,<br />
with serrated back<br />
Tipped,<br />
with serrated back<br />
DoubleBack tip<br />
with carrier plate<br />
3.6.5 Removing and fitting the cutters<br />
Removal:<br />
1. Clean the clamping screws in the cutterhead before<br />
removing the cutters.<br />
2. Undo the clamping screws on the cutterhead,<br />
working from the outside inwards.<br />
3. Push clamping ledge out to the side.<br />
4. Remove cutters from the serration.<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG <strong>AG</strong> <strong>Weinig</strong> <strong>Tools</strong> 3-21