Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
Weinig Tools - OERTLI Werkzeuge AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PowerLock<br />
2.3.4 Mechanical design of the tool<br />
Profile cutterhead with profiled cutters. Solid steel body.<br />
Robust, reliable construction for low-noise, vibrationfree<br />
operation.<br />
1 Body<br />
2 Clamping ledge<br />
3 Clamping screw<br />
4 Profiled cutter<br />
4 3 2 1<br />
DOKW0048<br />
Solid,<br />
with serrated back<br />
Tipped,<br />
with serrated back<br />
DoubleBack tip<br />
with carrier plate<br />
The clamping ledges are marked at the end in<br />
accordance with the profiled cutter thickness (in mm).<br />
The ledges are hardened, with ground clamping area.<br />
Right or left clamping ledges are used,<br />
depending on the direction of tool rotation.<br />
DOKW0026<br />
2.3.5 Removing and fitting the cutters<br />
Removal:<br />
1. Release clamping screw (1).<br />
2. Release clamping ledge with striker (2).<br />
3. Pull out profiled cutters.<br />
2<br />
1<br />
DOKW0049<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG <strong>AG</strong> <strong>Weinig</strong> <strong>Tools</strong> 2-11
Change language