Ed. 07/2006 - Scotsman

Service manual
VI.
INSTALLATION
a) Handling, unpacking and disposal of packing
Check that the packaging has not been
damaged during transportation.
Proceed carefully with the unpacking, and
then place the machine in its final position.
To lift the equipment, secure the machine
equally on all sides and lift using the rings
which are fixed on the upper cover
(EVE200 –EVE400) or the basement holes
(EVE650-800). Avoid passing under the
machine when lifted.
It is possible to move the machine with a fork-lift lifting from the base (pay attention
to the centre of gravity and the weight of the machine).
All damage caused to the
machine during
transportation should be
reported immediately to the
deliverer and noted on the
delivery slip.
The crate is made of a
recyclable material (wooden
cage + polyethylene film);
dispose of it via an
ecological waste disposal
company dealing in the
recovery of prime materials
and waste disposal.
18
Rev. 07/2006