2011 Ford Fiesta AE Page 1

2011
Ford Fiesta
ABOUT THE VEHICLE
Make: Ford
Model: Fiesta
Year: 2011
Scosche Pro App
STANDARD/ OPTIONAL
- AM/FM/MP3 in-dash CD Player
- 3.5mm Aux/mp3/USB ipod input
- Satellite Radio
SPEAKER NOTES
Front Speakers
Door Speaker: 1” Tweeter
Lower Door: 6 1/2”
Speaker Adapter: TBA
Speaker Harness: TBA
Speaker Assembly: (4) T-27 torx securing
speaker.
Dimensions: Tweeter Speaker
L: 1.62” L: 6.50”
W: 1.62” W: 6.50”
D: 0.75” D: 2.37”
APPLICATIONS
Dash Type: New Custom Dash
Aftermarket Type: Single
Aftermarket Kit: TBA
Harness:
TBA
Antenna Adapter: VWA3B
Auxiliary Input: Below A/C Controls
Rear Speakers
Lower Door: 6 1/2”
Speaker Adapter: TBA
Speaker Harness: TBA
Speaker Assembly: (4) T-27 torx securing
speaker.
Dimensions:
Speaker
L: 6.50”
W: 6.50”
D: 2.37”
FACTORY COLOR CODES
(+)12v Battery:
Yellow/Red
(+)12v Accessory:
Brown/White
(-) 12v Ground: Black/Blue
(+)12v Amp Turn On: N/A
Left Front Speaker (+): White
Left Front Speaker (-): White/Brown
Right Front Speaker (+): White/Purple
Right Front Speaker (-): White/Orange
Left Rear Speaker (+): White/Green
Left Rear Speaker (-): Brown/Yellow
Right Rear Speaker (+): Brown/White
Right Rear Speaker (-): Brown/Blue

2011 Ford Fiesta
PRELIMINARY:
Disconnect the negative battery cable.
RADIO REMOVAL
VEHICLE DISASSEMBLY
Make: Ford
Model: Fiesta
Year: 2011
Scosche Pro App
FRONT DOOR SPEAKERS
1. Use PRT to remove shroud above radio.
2. Use 7mm to remove (2) black screws.
3. Use PRT to loosen radio bezel.
4. Pull out radio and unplug harness and antennas.
5. Use Torx T-15 to remove (2) screws holding in airbag light.
6. Remove radio.
TWEETERS
1. Use PRT to remove cap behind door handle and
remove (1) Torx T-15 Screw.
2. Use PRT to pop screw caps to reveal and remove
(3) Torx T-15 screws.
3. Use PRT to remove door handle cover and remove
(2) Torx T-27 Screws.
4. Use PRT to pop door clips.
5. Unplug harness and unclip door handle and remove
door panel.
6. Use Torx T-27 to remove speaker screws unplug harness
and remove.
REAR DOOR SPEAKERS
OEM COLOR CODES
+12 Volt Constant: Lt. Green/ Purple
+12 Volt Acessory: Pink/ Black
Ground: Black/ Lt. Green
1. Follow door panel removal instructions.
2. Use PRT to remove tweeter from houseing.
Rear Right Positive:
Rear Right Negative:
Orange/ Red
Brown/ Pink
1. Use PRT to remove plastic cover.
2. Use PRT to remove cap behind door handle and
remove (1) phillips head screw.
3. Unscrew (2) Torx T-27 located under door handle.
4. Use PRT to pop door clips.
5. Unplug harness and unclip door handle and remove
door panel.
6. Use Torx T-27 to remove speaker screws unplug harness
and remove.