MX-M283N/M363N/M453N/M503N Operation-Manual GB - Sharp

abc
abc
abc
abc
abc
COPIER
Punch function
If an optional punch module is installed, holes can be punched in output.
Paper size that can be punched is B5R to A3 (7-1/4" x 10-1/2" to 11" x 17"). However, A3W (12" x 18") sized paper and
special media such as transparency film and tab paper cannot be used.
[Examples]
[Original 1]
[Punch positions]
[Original 2]
[Punch positions]
The hole punch function cannot be used with the saddle stitch or paper folding function together.
Original placement orientation (for the staple sort and punch functions)
When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling
or punching in the desired position on the paper.
Staple sort
Punch
Document feeder tray Document glass Document feeder tray Document glass
One staple (top)
abc
Two staples
abc
abc
One staple (bottom)
abc
abc
2-37
Contents