MX-M283N/M363N/M453N/M503N Operation-Manual GB - Sharp

SCANNER/INTERNET FAX
Internet fax mode
The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in
"Scan mode, USB memory mode, Data entry mode" (page 5-71).
1st screen
2nd screen
Internet Fax/Special Modes
OK
Internet Fax/Special Modes
OK
Program
Timer
(1)
Erase
2in1
Dual Page
Scan
Card Shot
1
2
Verif.
Stamp
(2)
Transaction
Report
2
2
Job
Build
Mixed Size
Original
Slow Scan
Mode
Original
Count
File
Quick File
(1) [2in1] key
☞ SENDING TWO PAGES AS A SINGLE PAGE (2in1)
(page 5-96)
(2) [Transaction Report] key
☞ CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction Report)
(page 5-99)
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
Scan/Special Modes
OK
(A)
Erase
Cancel
OK
(B)
(C)
Edge
Erase
Centre
Erase
Edge+Centre
Erase
Edge
10 (0~20)
mm
Side Erase
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special mode menu screen. Touch this key when you wish
to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special mode menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special mode menu
screen.
5-72
Contents