MX-M283N/M363N/M453N/M503N Operation-Manual GB - Sharp

FACSIMILE
POLLING MEMORY TRANSMISSION USING
F-CODES
When your machine receives a transmission request from another machine, this function sends a fax stored in an
F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the
F-code configured in your machine or transmission will not take place.
The document to be transmitted must be scanned into an F-code polling memory box.
Transmission request (polling)
using an F-code
The other
machine
Sub-address:
Passcode:
AAAAAAAA
XXXXXXXX
The machine
F-code polling memory box
Box name:
Sub-address:
Passcode:
BBBB
AAAAAAAA
XXXXXXXX
Transmission
System Settings: F-Code Memory Box (page 7-100)
This is used to create memory boxes (polling memory) for F-code polling memory transmission.
A memory box name, sub-address, and passcode are programmed in each box.
SCANNING A DOCUMENT INTO A MEMORY BOX FOR
F-CODE POLLING TRANSMISSION
Follow these steps to scan a document into a memory box (polling memory) for F-code polling transmission.
1
2
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Memory Box] key.
☞ SPECIAL MODES (page 4-70)
4-116
Contents