MX-M283N/M363N/M453N/M503N Operation-Manual GB - Sharp

COPIER
2
A system
B system
Inch system
(B)
Ready to scan for copy. Copies will be
delivered in 2 parts.
Image Edit
Multi-Page Enlargement
Enlargement Size
(A Size)
A2
A1
A0
A0x2
Border Print
Original Size
* The size that is twice A0 size.
A5
A4
A3
Cancel
Original Orientation
(2) (3) (A) (1)
Enlargement size
Original size
A2
A3, A4, A5
A1
A3, A4, A5
A0
A3, A4
A0 x 2* A3
B3
B4, B5
B2
B4, B5
B1
B4, B5
B0
B4
22" x 17" 11" x 17", 8-1/2" x 14", 8-1/2" x 11"
22" x 34" 11" x 17", 8-1/2" x 14", 8-1/2" x 11"
34" x 44" 11" x 17", 8-1/2" x 14", 8-1/2" x 11"
44" x 68" 11" x 17"
OK
OK
1
3
Set the enlargement size and the original
size.
(1) Select the size system that you wish to use
for multi-page enlargement.
Touch the keys to display the screen that shows
the desired group of sizes.
• 1st screen: A system
• 2nd screen: B system
• 3rd screen: Inch system
(2) Select the enlargement size.
(3) Select the size of the original to be used.
A suitable original placement orientation (A) and the
number of sheets of paper required for the enlarged
image (B) are displayed based on the selected original
size and enlargement size.
Check the placement orientation and number of sheets.
The combinations of original sizes and enlargement sizes
shown in the table at left are possible for multi-page
enlargement.
• An A size original cannot be enlarged to a B size, and a B size original cannot be enlarged to an A size.
• To print a borderline around the copy image, touch the [Border Print] key so that it is highlighted.
3
Place the original face down on the
document glass in the orientation
indicated in the screen.
2-108
Contents