MX-M283N/M363N/M453N/M503N Operation-Manual GB - Sharp

SYSTEM SETTINGS
Program
If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings
and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting
the program.
When the [Program] key is touched, the following screen appears.
System Settings
Program
Back
Add New
Program 1
Program 3
Program 5
Program 7
Program 9
Program 11
Program 2
Program 4
Program 6
Program 8
Program 10
Program 12
• [Add New] key
Use this to add a new program.
• List display
This displays a list of the currently stored programs. A
program can be selected to open an edit/delete screen
for the program.
Storing a program
Touch the [Add New] key in the above screen to open a registration screen. Up to 48 programs can be stored.
For more information, see "Settings" (page 7-19).
Editing and deleting programs
A program can be selected from the list in the above screen to open an edit/delete screen for the program.
For more information, see "Settings" (page 7-19).
Delete a program with the [Delete] key.
Settings
• A timer setting cannot be included in a program.
• At least one one-touch key must be specified in a program or the program cannot be stored.
Item
Description
Program Number
Program Name
Address
Address Book screen
Condition Settings
Address Mode Setting
Mode Settings
Set the number to be assigned to the program. The lowest available number is
automatically entered. To change the number, enter a number from 01 to 48. A
number that has already been stored cannot be used.
Enter a maximum of 36 characters for the program name.
Select the address(es) to be used in the program from the address book. Up to 500
destinations can be stored in one program.
This displays a list of the currently stored addresses.
Touch the [Setup] key to open the condition settings screen for an address.
Select the mode in which the address is used (Internet fax, scan, etc.) When a mode
is selected, the settings for that mode appear.
Frequently used settings can be stored in the same way as when they are selected
for a mode.
7-19
Contents