MX-M283N/M363N/M453N/M503N Operation-Manual GB - Sharp

SYSTEM SETTINGS
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also
shown.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• For information on the general settings, see "System Settings (General) List" (page 7-6).
• For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-97).
User Control
Item Factory default setting Page
■ User Control 7-45
● User Authentication Setting 7-45
User Authentication Disabled 7-45
Authentication Method Setting
Authenticate a User by Login Name
and Password
7-45
Device Account Mode Setting Disabled 7-45
● Other Settings 7-46
Actions when the Limit of Pages for Output Jobs
Job is Completed even when the Limit
of Pages is Reached
7-46
The Number of User Name Displayed Setting 12 7-46
A Warning when Login Fails Disabled 7-46
Disabling of Printing by Invalid User Disabled 7-46
Automatically print stored jobs after login Disabled 7-46
Default Network Authentication Server Setting – 7-46
Perform LDAP server access control. Disabled 7-47
Display Usage Status after Login – 7-48
User Information Print – 7-48
● User List – 7-49
● Page Limit Group List – 7-51
● Authority Group List – 7-52
● Favourite Operation Group List* – 7-55
Favourite Operation Group Registration* – 7-55
My Menu List* – 7-56
● User Count – 7-57
* This cannot be set on the machine. Set this in "User Control" in the Web pages.
7-29
Contents