TRUST MADE EASY.

STAIRS, PLATFORMS AND CROSSINGS
www.hymer-alu.de
2221
Fixed stairs with platform,
step angle 45°
G
» Step width optionally 600, 800 or 1000 mm.
» As standard with a handrail, may optionally be mounted on the left or the right,
2. handrail at extra cost.
» 1100 mm high guardrail on the platform, with knee and foot rail.
» Platform length 500 mm, extension in steps of 500 mm for aluminium profile steps
and grating platforms. Where aluminium chequer plate is used
intermediate sizes are possible. Platform lengths are limited to 2500 mm
in cantilever version.
» Aluminium profile steps 250 mm deep, alternatively aluminium or steel grating steps
270 mm deep at additional cost.
» Standard design with 2 wall mounting brackets at top and floor brackets
at bottom, on request at top with suspension hook or bearing bracket at additional cost.
» Triangular brackets must be used for side wall mounting (price on request), platform
exit optionally on the left or on the right.
» Outer step width including single handrail = step width
+ 100 mm, or step width + 150 mm with handrail on both sides.
» Intermediate sizes at price of next highest number of steps.
» Total loading capacity 300 kg, step load 150 kg.
» Shipped in subassemblies pre-assembled in the factory.
Note: according to DIN 1055 and DIN 18065,
these stairs are not permissible in residential buildings.
1100 mm
Platform length
Standing height
250
45°
250
Overhang
Step width
126