Skills Proficiency awards in Basic Fabrication ... - City & Guilds

2.11 Produce holes by drilling and
punching.
2.12 Bend simple shapes on a press brake.
2.13 Fold simple shapes on sheet metal
folding machines.
2.14 Stiffen sheet metal and plate.
2.15 Roll a cylinder.
2.16 Assemble components: produce a
level bench
a welded work
b simple bolted structural work.
2.17 Develop patterns between parallel
planes, cut out and form to shape
a conic frustum
b square to round transformer.
2.18 Lift and move materials by hand
and with the use of lifting and
handling equipment.
2.19 Use scaffold platforms less than
2m high in accordance with
national/local standards and use
and transport ladders.
Welding
2.20 Hard solder a lap joint between two
pieces of sheet metal/copper pipe.
2.21 Braze weld two pieces of cast iron.
2.22 Assemble oxy-fuel gas welding
equipment and check for leaks.
2.23 Produce oxy-fuel gas welded joints
in low carbon steel, using the
leftward technique
a butt welds
b open outside corners.
2.24 Investigate the effects of oxy-fuel
gas welding with oxidising, neutral
and reducing flames.
(✓)
Skills Proficiency awards in Basic Fabrication, Welding and Pipework
43