5-Cylinder Operating Manual - Zanshin
5-Cylinder Operating Manual - Zanshin
5-Cylinder Operating Manual - Zanshin
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSPECTION<br />
End of season<br />
Work at end of season<br />
At the end of the season you should subject the engine to a check and visual inspection.<br />
You should have the service work on your Volkswagen Marine boat engine conducted by<br />
your VW Marine Service Partner, as the work requires specialised knowledge and special<br />
tools.<br />
Important<br />
● Observe the safety precautions<br />
beginning on page 22<br />
before performing any work on<br />
the engine or in the engine<br />
compartment.<br />
● Please be sure to observe the<br />
working sequences and information<br />
on engine preservation<br />
from page 67.<br />
Scope of work<br />
Visual inspection for leaks and damage<br />
Interrogate fault memory of engine electronics<br />
Change motor oil and oil filter 67<br />
Renew fuel filter 48<br />
Check air filter and clean if necessary 50<br />
Check seawater filter* and clean if necessary 49<br />
Check coolant level and top up if necessary 52<br />
Seawater pump: Check impeller and renew if necessary 55<br />
Check reactive anode and renew if necessary 57<br />
Clean and preserve engine 67<br />
Seawater circuit: flush and drain 68<br />
Fill fuel tank until full<br />
Note<br />
Maintenance must be performed on the<br />
reversing gearbox or the Z drive in accordance<br />
with the specifications of the respective<br />
manufacturer.<br />
page<br />
INSPECTION 35<br />
35