NETWORK TECHNOLOGY - SWS a.s.

Technical Data // Outlets
DN-9006/B5-N DN-9006-N DN-9007 DN-9008
Standards
Connector IEC 60603-7-5
Mechanical Properties
Material: housing outlet Zinc Die-casting Zinc Die-casting
Material: faceplate/case ABS UL 94-HB ABS UL 94-HB
Material: contact spring Phosphor Bronze Phosphor Bronze
Material: contact finish 3mm 50 micro-inch gold plated 3mm 50 micro-inch gold plated
Material: RJ-45 (shielded housing) Bronze with Nickel plated Bronze with Nickel plated
Material: IDC Phosphor Bronze Phosphor Bronze
Material: IDC finish Tin plated Tin plated
LSA PLUS: Cu-conductor diameter Solid&stranded AWG 26-AWG 22 Solid&stranded AWG 26-AWG 22
LSA PLUS: insulation diameter 0.7-1.6 mm 0.7-1.6 mm 0.7-1.6 mm 0.7-1.6 mm
Color code TIA/EIA 568 A&B TIA/EIA 568 A&B
Connection: strain relief/ cable shielding metal cramp with tin plated metal cramp with tin plated metal cramp with tin plated metal cramp with tin plated
Cable diameter: max. 10mm max. 10mm max. 10mm max. 10mm
Performance
Insertion force 30N max 30N max 30N max 30N max
Mating cycle 750 750
IDC punching time Max. 200 Max. 200
Operating temperature -40°C … +80°C -40°C … +80°C
Electrical Properties
Contact resistance 500 MΩ
Voltage proof (contact -contact) 1000 VDC 1000 VDC 1000 VDC 1000 VDC
Voltage proof (contact -shield) 1500 VDC 1500 VDC 1500 VDC 1500 VDC
Operation current 1A 1A 1A 1A
PoE conform acc. to IEEE802.3at
Transmission Properties
Cat. 6A
Class EA
TIA/EIA Permanent Link
ISO/IEC Permanent Link
Cat. 6
ISO/IEC 11801:2002 AMD1&2 ; EN50173-1:2007
Class E
Channel Class E
Cat.5e
Cat.3
10 Gbit Ethernet acc.to IEEE802.3an 10 Gbit Ethernet gemäß IEEE802.3an
Gbit Eternet acc.to. IEEE802.3
113