NETWORK TECHNOLOGY - SWS a.s.

Fiber-Optic FTTH Accessories
FTTH Termination Box
Mechanical Splice for Optical Fiber
250µm until 900µm
Light weight, small size, easy installation. Applications: FTTX Systems, PON Networks,
CATV Links, Optical Signal Distribution
• Usable inside and outside of buildings
• Suitable for SC, FC or ST, LC Duplex couplers
• Suitable for mechanical splice type e.g. ALWL-SPM-21-1
• Simple open and close by snap-in technology
• For wall mounting or several applications usable
Reduce your costs - Assembly time less than 45sec after preparing fiber ends.
• Usable for 125µm fiber with outer diameter cladding 900/900µm and 250/900µm
• Transparent body for immediate connection confirmation
• Applicable for Optical Fiber Cable Joint and FTTH Drop Cable
• Usable inside and outside of buildings
302254 / ALWL-SC2AP
FTTH Termination Box
301257 / ALWL-SPM-21-1
Mechanical Splice - 900/900;250/900µm
301264 / ALWL-SPM-31-1
Mechanical Splice - 900/900µm, 250/900µm, 250/250µm
SC Pre-Polished Fiber Optic Connectors
MM 50µm
Splice Holder
Reduce your costs - Assembly time less than 45sec after preparing fiber ends.
• Zirkonia ceramic ferrule
• Diameter tight buffer: 900µm
• Diameter cable jacket: 2,0m / 3,0mm and 250µ on request
• Insertion loss: ~ 0,1db
• Return loss: ~ ≥ 50db
• Assembly time: ≤ 45sec
• Tension force tight buffer: 4,9N (900µm)
• Tension force jacket cable: 58N (3,0mm)
Special Splice Holder for mechanical splice
• for 6 mechanical splices
• for ALWL-SPM-21 and ALWL-SPM-31
• for mounting in ALWL-SC2AP
301240 / ALWL-SCOPTOFAST-M50
900µm pr-epolished SC FO-Connector MM Beige
301233 / ALWL-SCOPTOFAST-M62
900µm pr-epolished SC FO-Connector MM Beige
305866 / ALWL-SHM-06
for ALWL-SPM-21 and ALWL-SPM-31
188