NETWORK TECHNOLOGY - SWS a.s.

Industrial Switches
Industrial Gigabit Ethernet Switch,
4 Port RJ45 + 2 Port SC
The Best Solution for rough Environmental Conditions!
The ISW-621TS15 provides a high level of immunity against electromagnetic
interference which is usually found in industrial enviroments. Being able to
operate under the temperature range from -40 to 75 Degree C, the ISW-621TS15
can be placed in almost any difficult environment.
• 4-Port 10/100Mbps Auto MDI/MDI-X RJ45
• 2-Port 100Base-FX interface for up to 15km (Single-mode fiber 9/125µm)
transmission distance
• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
• Supports Auto-Negotiation and 10/100Mbps half / full duplex mode for each copper port
• High performance Store and Forward architecture
• Prevents packet loss with back pressure (Half-Duplex) and
IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• 1.2Gbps Backplane
• Integrated address look-up engine, supports 2K absolute MAC addresses
• 1Mbit on-chip frame buffer
• IP-30 protection with metal case
• DIN Rail and Wall Mount Design
• Redundant Power Design: 12~48V DC redundant power with polarity reverse protect function
• -40 to 75 °C operating temperature
310280 / ISW-621TS15
Industrial Gigabit Ethernet Switch, 4 Port RJ45 + 2 Port SC
Industrial Managed Fast Ethernet Switch,
8-Port + 2 Combo-Ports
The Best Solution for rough Environmental Conditions!
The PLANET ISW-1022MT is equipped with multiple redundant ring technology
delivered in a rugged strong case. The switch is designed for a reliable Network
Connection under extreme harsh environmental conditions.
• 8-Port 10/100Mbps Auto MDI/MDI-X RJ45
• 2-Port Gigabit TP/SFP combo interface
• 1 RJ-45 Console interface for Switch basic management and setup
• Redundant Power Design: 12~48V DC redundant power with polarity reverse protect function
• -40 to 75 °C operating temperature
• IP-30 protection with metal case
• Relay alarm for port breakdown and power failure
• Free fall, Shock and Vibration Stability
• Rapid Ring, Dual Homing, Couple Ring Topology
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3z Gigabit Ethernet standards
• Prevents packet loss with back pressure (Half-Duplex) and
IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• Supports VLANs (IEEE 802.1Q Tagged based VLAN, Port-Based VLAN, GVRP,
up to 256 VLANs groups, out of 4K VLAN IDs)
• Supports Spanning Tree Protocol (STP, IEEE 802.1D Spanning Tree Protocol,
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol)
• Supports Link Aggregation (up to 4 Trunk groups, Up to 4 ports per trunk group with
800Mbps bandwidth, IEEE 802.3ad LACP, Cisco ether-Channel)
• IGMP Snooping v1 and v2
• IGMP Query mode for Multicast Media application
• MAC address Filtering and MAC address Binding
• IP address security management to prevent unauthorized intruder
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port
• Web-based, Telnet, Console Command Line management
• Access through SNMP v1, v2c and v3
310266 / ISW-1022MT
Industrial Managed Fast Ethernet Switch, 8-Port + 2 Combo-Ports
259