Download PDF - MachMotion.com

dn-03 (Input terminals status)
Use dn-03 to check the status of Input terminals.
Digital Input status display is described below:
10
9
8
7
6
5
4
3
2
1
LED Number
When Input terminal signal has a low logic level (close loop with IG24), the corresponding LED will be on.
When Input terminal signal has a high logic level (open loop with IG24), the corresponding LED will be off.
Table below shows the functions of the digital input.
DI-1 ~ DI -10 are programmable Inputs. Default settings are shown below.
For programmable function list see section 5-6-1.
LED Number Input terminal number Default function
1 DI-1 SON
2 DI -2 ALRS
3 DI -3 PCNT
4 DI -4 CCWL
5 DI -5 CWL
6 DI -6 TLMT
7 DI -7 CLR
8 DI -8 LOK
9 DI -9 EMC
10 DI -10 SPD1
3-9