Cutter Parts - Ppsokc.com

Printer’s Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106
800-375-3787 405-272-0272 405-232-3053 (fax) ppsokc@aol.com ppsokc.com
Cutter Parts
B41 Seybold Knife Bolt
Bolts For Seybold CG And Most Older Seybolds. This
Square Headed Knife Bolt Is Fitted With An Integral
Washer. The Washer Rotates On The Bolt But Is Not
Removable. This Bolt Has 1/2"-12 Threads And Measures
25/32" Long Below The Washer. The Square Head
Measures 5/8" Across The Flats. The Steel Washer Is 1/8"
Thick And Measures 1-1/8" In Diameter. A Screwdriver
Slot Is Provided In The Threaded End To Aid In Removal
If The Head Gets Rounded Over From A Worn Wrench Or
Socket. (This Is The Same Bolt As Our B42 Bolt, Except
That It Has A Different Thread Pitch.)
B42 Seybold Knife Bolt
Bolts For Very Early Seybold Cutters. It Is The Same As
Our Part Number B41 Except It Has A 1/2-13 Thread.
(Our B41 Bolt Has A 1/2-12 Thread Pitch.) This Square
Head Knife Bolt Is Fitted With An Integral Washer. The
Washer Rotates On The Bolt But Is Not Removable. This
Bolt Measures 25/32" Long Below The Washer. The
Square Head Measures 5/8" Across The Flats. The Steel
Washer Is 1/8" Thick And Measures 1-1/8" In Diameter. A
Screwdriver Slot Is Provided In The Threaded End.
B43 Seybold & Oswego Knife Bolt
Hex Head Knife Bolts With Integral Washer. This Bolt
Has A 1/2"-12 Thread And Measures 3/4" Long Below The
Washer. The Hex Head Is 11/16" Across The Flats. The
Washer Is 1/8" Thick With A 1-3/16" Diameter. It Is Made
From One Piece Of Steel, Including The Washer, And It
Includes A Screwdriver Slot In The Tip And Has A Black
Oxide Finish For Corrosion Resistance.
B48 National, Challenge & Early Seybold Knife Bolt
For Challenge 420, National, And Early Seybold Paper
Cutters This Steel Hex Head Cap Screw. The 1/2"-12
Thread Is 1-3/32" Long Below The Washer. The Hex Head
Is 3/8" High And Measures 3/4" Across The Hex Flats. The
Washer Is Captive And Is Not Removable.
B56 Chandler & Challenge Knife Bolt
This Steel Hex Head Bolt Has A 1/2-12 Thread. It
Measures 13/16" Long Below The Washer. The Hex Head
Measures 3/4" Across The Flats. The Steel Washer Is
Captive, It Rotates But Does Not Come Off. The Steel
Washer Is .11" Thick And Measures 1-3/8" In Diameter.
B45 Challenge Knife Bolt
For Challenge 305, 265, 265h, 265 Titan & 20 Cutters.
Socket Head Cap Screw, 1" Long Below The Head, With
A 3/8-16 Thread. Supplied Complete With A Heavy Flat
Washer. The Washer Is 1" In Diameter And 1/8" Thick.
B44 Lawson Knife Bolt
Grade 10.9 Steel Socket Head Cap Screw. It Is .70" Long
Below The 3/32" Thick Steel Washer. It Has A 1/2"-13
Thread. The 7/8" Diameter Threaded Washer Rotates
Freely In A Groove But It Will Not Fall Off The Bolt.
B53 Schneider And Perfecta Knife Bolt
Hex Head Bolt. M12 X 22mm Long Below The Washer,
1.5mm Thread Pitch. Steel Washer Is 30mm (1-3/16") In
Diameter And Is Included With Each Bolt.
B511 Pivano Knife Bolts
For 40" Pivano Cutters. Socket Head Cap Screw, M12 X
25mm Long Below The Head. 1.75mm Thread Pitch. Also
See Our Pivano Knife Bolt Part Number B62
B57 Imperial And Horizon Knife Bolt
This Steel Hex Head Bolt Is 11mm ( .43") Long Below The
Head. It Has An M10 Thread With A 1.5mm Thread Pitch.
The Head Measures 17mm (.67") Across The Flats And Is
5mm (.20") High. Black Oxide Finish For Corrosion
Resistance.
B60 Wohlenberg Knife Bolt
These Alloy Steel Socket Head Blade Bolts Are .70" Long
Below The Washer And Have A 1/2-13 Thread. The 4140
Hardened Steel Washer Is Captive On The Head, It Rotates
In Place But It Will Not Fall Off. They Are Designed For
A Torx Plus Driver. Using The Incorrect Driver Will
Eventually Strip The Bolt Head.
B61 Wohlenberg Knife Bolt
They Are .97" Long Below The Washer And Have A 1/2-
13 Thread. The 4140 Hardened Steel Washer Is Captive On
The Head, It Rotates In Place But It Will Not Fall Off.
These Alloy Steel Socket Head Blade Bolts Use A Torx
Plus Driver. Using The Incorrect Driver Will Eventually
Strip The Bolt Head.
B63 Wohlenberg Knife Bolt
This Bolt Is 25mm (.98") Long Below The Washer And
Has An M12 Thread. The Washer Is Captive On The Head,
It Rotates In Place But It Will Not Fall Off. Alloy Steel
Socket Head Bolts Are Designed For A Torx Plus Driver.
Using The Incorrect Driver Will Eventually Strip The Bolt
Head.
B64 Wohlenberg Knife Bolt
This Bolt Is 19mm (.75") Long Below The Washer And
Has An M12 Thread. The Washer Is Captive On The Head,
It Rotates In Place But It Will Not Fall Off. These Alloy
Steel Socket Head Blade Bolts Use A Torx Plus Driver.
Using The Incorrect Driver Will Eventually Strip The Bolt
Head.
B67 Triumph Knife Bolt (9004518)
For Triumph No. 46, 48, 4800, 4810 & 4850 Paper Cutters
These Special Socket Head Bolts Have A Low Profile
Head. They Have An M10 Thread Which Is 13mm (.51")
Long Below The Head. The Head Is 16mm In Diameter
And Is 6mm Thick. Black Oxide Treatment For Corrosion
Resistance
B702 Triumph Mbm Knife Screws
For MBM Triumph 3600 And MBM Triumph 3610 Paper
Cutters. (3600-030) These Custom Made Screws Have A
6mm Diameter Thread. They Are 10mm Long Below The
Head. The Slotted Head Is 10mm In Diameter
B54 Pivano Knife Bolt
This Socket Head Cap Screw Has An M12 Thread, A
1.75mm Thread Pitch, And It Is 30mm (1.18") Long
Below The Head. Steel With A Black Oxide Finish.
B62 Pivano Knife Bolt
Socket Head Cap Screw, M12 X 30mm (1.18") Long
Below The Head. 1.5mm Thread Pitch. Black Oxide Finish
For Corrosion Resistance.
B46 Polar Knife Bolt
For Polar 107, 112, 115, 137, 145, 150 & 155 Cutters.
Socket Head Cap Screw, M12 X 22mm Long (.87") Below
The Head. This Has A Screwdriver Slot Cut In The End As
Shown For Ease Of Removal If The Allen Key Socket Gets
Stripped. Black Oxide Finish For Corrosion Resistance.
This Is Just A Sample Of Items Available 51