Product Data Product Data - Castrol TDS

Product Data
Product Data
Castrol Clearedge EP 690
Soluble Oil
Description
Castrol Clearedge 690 is a phenol and nitrite free soluble oil. It forms a transparent emulsion.
Application
Clearedge EP 690 is designed to cover the widest range of metalworking operations. Suitable for metal cutting
and grinding of ferrous and non-ferrous materials, including copper and its alloys, aluminium and its alloys
including high silicon grades, stainless steel, nimonic alloys and ceramic materials. Suitable for use in central
coolant systems because of its versatility and long service life.
Advantages
• Highly stable emulsion. Long service life - economy.
• Phenol free. Lower disposal costs - economy.
• High capacity to cope with tramp oil contamination. Emulsion does not break down - long service life.
• Can be used on a wide range of materials and operations. Versatile. Allows product rationalization – one
grade for all uses.
• Detergent product. Assists in machine cleanliness – less system maintenance.
• Wide dilution range. Versatile. Rationalisation – one grade for all uses.
• Wide water hardness tolerance. Suitable for all types of Australian tap water. No special water treatment
necessary.
Typical Properties
Appearance Concentrate
Brown liquid
5% Emulsion Appearance Transparent clear
Density @15 0 C, g/mL 0.972
Water content interferes with flash
Flash Point
point determination
pH @ 5% 9.4
Corrosion test IP 287 % break point 5
Refractometer Factor 1
Copper Corrosion ASTM D130
Class 1b
Clearedge EP 690
106828_2006_03
Castrol and the Castrol logo are trademarks of Castrol Limited, used under licence.
All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However, such information
may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material Safety Data Sheets are available for all
Castrol products. The MSDS must be consulted for appropriate information regarding storage, safe handling and disposal of a product. See
www.msds.castrol.com.au
Castrol Australia Pty Limited, Industrial Lubricants and Services, GPO Box 5222, Melbourne VIC 3001
Technical Advice Line 1300 557 998 / Customer Service 1300 554 890
www.castrol.com/industrial
Page 1 of 2

Product Data
Recommended Dilutions
Cast
Iron
Low
Tensile
Steel
High
Tensile
Steel
Stainless
Steel
Low Alloy
content
Aluminium
High Alloy
content
Aluminium Copper Brass
MATERIAL
OPERATION
Boring 3-5% 4-6% 4-6% 4-6% 5-10% 6-12% 4-6% 4-6%
Drilling 3-5% 4-6% 5-10% 5-10% 5-10% 6-12% 4-6% 4-6%
Grinding 3-5% 3-5% 3-5% 3-5% 5-10% 6-12% 3-5% 3-5%
Milling 3-5% 4-6% 5-10% 5-10% 5-10% 6-12% 5-10% 4-6%
Sawing 3-5% 5-10% 6-12% 6-12% 6-12% 6-12% 5-10% 5-10%
Screw
Cutting 3-5% 5-10% 6-12% 6-12% 6-12% 6-12% 5-10% 5-10%
Tapping 3-5% 5-10% 6-12% 6-12% 6-12% 6-12% 5-10% 5-10%
Turning 3-5% 5-10% 5-10% 5-10% 6-12% 6-12% 5-10% 5-10%
Refractive Index
Refractive Index Graph
12
11
10
9
8
7
6
5
4
3
2
1
0
0 1 2 3 4 5 6 7 8 9 10
Ref ractometer reading
Additional Information
Clearedge EP 690 is classified as hazardous according to the criteria of NOHSC. It is irritating to skin, may cause
sensitization by skin contact and presents a serious risk of damage to eyes. The personal protective equipment specified
on the MSDS, safety goggles and appropriate gloves should be worn. For further information please refer to separate
Material Safety Data Sheet available on request.
Clearedge EP 690 is classified as C2 combustible according to AS 1940 for storage and handling purposes.
Spillage:
SMALL - 20 LITRES OR LESS
Soak up on Castrol Diatomaceous Earth or similar inert oil absorbent. Arrange for disposal through an
approved facility.
LARGE - GREATER THAN 20 LITRES
Contain as soon as possible, remove by best means available and arrange recycling (preferred) or disposal
through an approved facility.
Clearedge EP 690
106828_2006_03
Castrol and the Castrol logo are trademarks of Castrol Limited, used under licence.
All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However, such information
may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material Safety Data Sheets are available for all
Castrol products. The MSDS must be consulted for appropriate information regarding storage, safe handling and disposal of a product. See
www.msds.castrol.com.au
Castrol Australia Pty Limited, Industrial Lubricants and Services, GPO Box 5222, Melbourne VIC 3001
Technical Advice Line 1300 557 998 / Customer Service 1300 554 890
www.castrol.com/industrial
Page 2 of 2