Download - Tech-Rentals

www.techrentals.com.au
General Industrial & Process Management
Flow Meters for Liquids & Gases
cont’d.
Combustion, Flue & Industrial
Gas Analysers cont’d.
GE Panametrics -200 to 400°C Transducers
PAN,OKS (6112)
AU
Very high temperature, wide range transducer pair for PAN,PT868/878
transit-time flowmeter. Temperature range -200 to 400°C, for pipe 80mm to
600mmØ. Uses special clamp system supplied. Appropriate protection and
safe-handling equipment is required for fitting and operation at very high or
low temperatures.
Polysonics Hydra SX30 Dual
Frequency Doppler Liquid Flowmeter
POL,HYDRA-SX30-2 (6132)
AU
Dual frequency doppler ultrasonic non-contact
flowmeter. Velocity range 0.06 to 10m/s, accuracy
±1%. Pipe size range 12 to 5,000mm diameter. Data
logging for 90,000 points, with PC software and
interface cable for download via RS232C interface.
Transducer temperature range -40 to 122°C.
Analogue output 4 to 20mA. Battery operated, 12h
continuous use (8h recharge).
Combustion, Flue & Industrial
Gas Analysers
See also Environmental Gas & Vapour Meters on page 67-68
Novatech O 2
and CO 2
Analyser/Transmitter
NOV,1637-5 (5954)
AU
Oxygen and carbon dioxide analyser for packaging
atmosphere, general industrial and research use.
Oxygen sensor reading 1ppm to 100% with 1%
accuracy. NDIR carbon dioxide analysis 0 to 100%
±3% of full scale. 2 x 4 to 20mA outputs, 1 common
& 3 selectable alarm relays. Gas connection 1/8 Swagelok. Flow rate with
internal pump 100 to 500cc/min. AC operation.
Testo 300M Combustion Gas
Analyser
TES,300M
MY
Flue gas analyser for combustion efficiency
measurement. Temperature range -40 to 1200°C
±0.5 (100) with gas probe
operation to 1,000°C max. Draught/pressure
range 80mBar, ±0.03. Gases measured: O 2
0 to
21%, ±0.2%; CO 2
[calculated] 0 to CO 2
max vol ±0.2%; CO 0 to 8,000ppm,
±20 (