Download - Tech-Rentals

www.techrentals.com.au
Environmental, OHS, Chemical & Laboratory
Airborne Dust & Particle Meters cont’d.
TSI Environmental Enclosure for the TSI,8530
TSI,8530-ENC (5875)
AU/MY
Enclosure to suit the TSI,8530. Includes two additional
batteries and charger. Includes waterproof enclosure and
heat shield and enclosure stand.
TSI Environmental Enclosure for the TSI,8530 Dusttrak II
TSI,8530-ENC-S (5876)
AU
Enclosure to suit the TSI,8530. Includes two additional batteries and
charger. Includes waterproof enclosure.
TSI 8533 Aerosol Monitor and Logger
TSI,8533 (5870)
AU
Portable dust and particle monitor, light scatter photometer.
Measure concentrations corresponding to PM1, PM2.5 and PM10. Aerosol
concentrations .001 to 150mg/m3. Used for industrial/occupational hygiene
surveys, indoor air quality monitoring, outdoor environmental monitoring,
baseline trending and screening etc. Will size particles in three sizes PM1,
PM2.5 and PM10.
TSI AM510 Personal Aerosol Monitor;
CSA & ATEX IS approvals
TSI,AM510 (5871)
AU
Wearable dust monitor. Built in Impator allows
you to chose either ‘none’, 1, 2.5 or 10μm particle
sizes. Datalogs TWA in the range of particle
concentrations from .001 to 20mg/m 3 Runs 9.2hrs
on rechargeable NiMH batteries. USB download
capability. CSA & ATEX IS approvals.
Air Quality & Heat Stress
Casella Microtherm WBGT
Area Heat Stress Monitor
CAS,MICROTHERM (5868)
AU
Portable area heat stress WBGT monitor with
real-time graphical display. Measures heat
stress potential [WBGT index] according to
ISO7243. PRTD sensors with internal calibrationreference
for wet-bulb, dry-bulb and globe temperatures. Large LCD display
for numerical or graphical indication of temperatures and processed values
for WBGT [indoor/outdoor plus TWA], relative humidity and dewpoint. Simple
keypad/menu setup. Data logging for up to 32 separate runs and 49,100
records, with interval 30s to 1h. RS232C port with included PC software for
download and reporting or realtime display. Low water-level warning, and
settable audible/visible WBGT alarm. Handheld, free-standing or tripodmount.
Battery operated.
Testo 635-2 Humidity, Temperature & Dewpoint Meter
TES,635-2 (5859)
AU
Portable humidity meter fitted with robust stainless probe
with sintered filter-cap for general or duct measurements to
120ºC, and fast-action K-type surface temperature probe.
Displays relative humidity, absolute humidity, dew point,
degree of humidity, enthalpy, temperature, and differential
temperature (dewpoint to surface). Operating range 2 to
98%RH (±2%). Air temperature -20 to 120ºC (±0.2/0.5).
Surface temperature -60 to 300ºC (±0.1). Internal memory
for 10,000 values with USB interface, cable and software for
download and presentation. Battery operated.
Air Quality & Heat Stress cont’d.
Testo 645 Humidity & Dewpoint Meter
TES,645-1 (5858)
AU
Portable humidity meter fitted with robust stainless
probe for ambient work or duct measurements
to 120°C. Displays relative humidity, absolute
humidity, dew point, degree of humidity, enthalpy
and temperature. Operating range 2 to 98%RH
[±2%], -20 to 120°C [±0.4/0.5]. Battery operated.
TSI Q-TRAK IAQ Monitor CO 2
,
CO Temperature & Humidity Logger
TSI,7565 (5861)
AU
Measures CO 2
0 to 5,000ppm ±3%, temperature
0 to 60ºC ±0.6ºC, humidity 0 to 95% ±3%, CO 0
to 500ppm ±3% and barometric pressure 517.15 to
930.87mmHg ±2%. Calculates dew point, wet bulb
and percent outside air. Displays 5 measurements
simultaneously. User selectable logging interval and
start stop times. Stores 39 days data at 1min intervals
56,035 data points. This unit also has external
thermocouple measurements.
TSI Q-Trak plus Indoor Air Quality Monitor
with Logging
TSI,8554 (5860)
AU/MY
Indoor air quality (IAQ) monitor for temperature
and humidity measurements, CO and CO 2
concentrations. Humidity range 0 to 95%,
temperature range 0 to 50°C. Electrochemical
cell for CO 0 to 500ppm. NDIR cell for CO 2
0 to
5,000ppm. Data logging for 48,671 data points
with interval adjustable 1s to 1h. Fitted with RS232
interface, and software included for download,
storage and reporting. Battery or mains operation
with AC adaptor.
Moisture & Humidity Meters
GE Panametrics PM880 Industrial
Moisture Analyser
PAN,PM880 (5911)
AU
Intrinsically safe moisture analyser for
compressed air systems, non-corrosive gases &
hydrocarbons such as natural gas (IS certification
to ATEX and CSA). Displays dew point, moisture
concentration, pressure & temperature. Dew point
calibrated measurement range -80 to 20°C with
data to -110°C. Pressure range 7 to 69bar limited
by sensor, gauge and safety-valve (operating range from 5μHg). Temperature
range -30 to 70°C. Gas flow operating range from static to 10,000cm/s velocity.
Supplied with compact sample system with gauge, safety-valve, sampling
valves and fittings (¼” Swagelok). Data logging of up to 100K moisture points,
with infrared port and software for download. Battery powered only (15-24h
operation) with second battery and charger (note charger is not IS).
69