4 IN 1 METAL DETECTOR - Harbor Freight Tools
4 IN 1 METAL DETECTOR - Harbor Freight Tools
4 IN 1 METAL DETECTOR - Harbor Freight Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.<br />
The method used in the Fuse test can also be used to test a Bulb. If the LED<br />
Light (2) illuminates and the Buzzer sounds, the Bulb is good.<br />
(See Figures C and L.)<br />
BULB<br />
<strong>METAL</strong> JUT (7)<br />
FIGURE L<br />
<strong>METAL</strong> PLATE (8)<br />
Microwave Leakage Detection<br />
1. Set the Selection Switch (4) to its “II” position. Turn the sensitivity knob forward<br />
for max. sensitivity.<br />
2.<br />
3.<br />
Move the AC Voltage Detection Area of the unit near the TV/monitor screen. The<br />
buzzer will sound and the LED will light when the unit detects the radiation.<br />
Move the unit away from the screen. The position where the LED and buzzer<br />
turn off is the position where the radiation is not severe.<br />
Flashlight Function<br />
1. Set the Selection Switch (4) to its “OFF” position. Then press the Flashlight<br />
Switch (5) to illuminate the LED Light (2). (See Figures B and M.)<br />
FIGURE M<br />
FLASHLIGHT SWITCH (5)<br />
SKU 97244 For technical questions, please call 1-800-444-3353.<br />
Page 12