4 IN 1 METAL DETECTOR - Harbor Freight Tools
4 IN 1 METAL DETECTOR - Harbor Freight Tools
4 IN 1 METAL DETECTOR - Harbor Freight Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
13.<br />
14.<br />
People with pacemakers should consult their physician(s) before use. Electromagnetic<br />
fields in close proximity to heart pacemaker could cause pacemaker<br />
interference or pacemaker failure. In addition, people with pacemakers should:<br />
• Avoid operating alone.<br />
• Properly maintain and inspect to avoid electrical shock.<br />
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter<br />
(GFCI) should also be implemented – it prevents sustained electrical shock.<br />
The warnings, precautions, and instructions discussed in this instruction manual<br />
cannot cover all possible conditions and situations that may occur. It must be<br />
understood by the operator that common sense and caution are factors which<br />
cannot be built into this product, but must be supplied by the operator.<br />
Save these instructions.<br />
Specifications<br />
Product Functions<br />
Electrical Requirements<br />
Pivoting Detector Arm<br />
Unit Body<br />
Construction<br />
Used for Metal Detecting, Detecting AC Voltage/DC Polarity,<br />
and Features a Flashlight<br />
Power Source: 9V Battery / Type: 9V x 1 / (Qty. 1, Included)<br />
Rotates 270° with Molded Stop to Allow No Further Travel<br />
Consists of a 3-Position Switch and a Momentary Light<br />
Button, Both Located on the Unit’s Face / A Sensitivity Dial<br />
is Located on the Unit’s Side<br />
ABS Poly Material<br />
Unpacking<br />
When unpacking, check to make sure that the item is intact and undamaged. If<br />
any parts are missing or broken, please call <strong>Harbor</strong> <strong>Freight</strong> <strong>Tools</strong> at the number shown<br />
on the cover of this manual as soon as possible.<br />
Set Up Instructions<br />
Read the entire Important Safety Information section at the<br />
beginning of this manual including all text under subheadings therein<br />
before set up or use of this product.<br />
WARN<strong>IN</strong>G<br />
Turn the Power Switch of the tool to its “OFF” position and<br />
remove its Battery before making any adjustments to the<br />
tool.<br />
Note: For additional information regarding the parts listed in the following pages, refer<br />
to the “FUNCTIONS” section in this manual.<br />
SKU 97244 For technical questions, please call 1-800-444-3353.<br />
Page 5