Stealth Cam Unit Ops Owner's Manual - Trail Camera
Stealth Cam Unit Ops Owner's Manual - Trail Camera
Stealth Cam Unit Ops Owner's Manual - Trail Camera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Setting the Video Mode in PIR operation mode: <br />
Your <strong>Stealth</strong> <strong>Cam</strong> can be programmed to record 10-‐180 seconds of <br />
video per triggering. The Video mode is only workable under PIR <br />
mode. <br />
• Switch the camera to the ON position. <br />
Ø LCD screen will display the camera status screen. <br />
• Press the [MENU] button once within 30 seconds to enter the <br />
programming mode. <br />
• The word PIR will be blinking, press OK to confirm the camera <br />
operation by PIR detection. <br />
• Press [UP] button TWO times to enter Video setting mode. <br />
• The word VIDEO will be blinking. <br />
• Press [OK] button and the video length in seconds will be blinking. <br />
• Press [UP] or [DN] button to select the desired video length from <br />
10 to 180 seconds in 5-‐second increments. <br />
• Press [OK] to save your selection. <br />
• Press [MENU] button to exit. <br />
WWW.STEALTHCAM.COM<br />
Toll Free 877-269-8490<br />
19
Change language