Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSTALLING YOUR TV<br />
Installation and important information<br />
Where to install<br />
Locate the television away from direct sunlight and<br />
strong lights. Soft, indirect lighting is recommended for<br />
comfortable viewing. Use curtains or blinds to prevent<br />
direct sunlight falling on the screen.<br />
Place the TV on a stable, level surface that can support<br />
the weight of the TV. In order to prevent injury and<br />
maintain stability of this apparatus, secure the TV to<br />
the level surface using the strap if fitted, or to a wall<br />
using a sturdy tie to the P clips provided. Otherwise<br />
secure the TV on the level surface using the supplied<br />
mounting screw.<br />
The LCD display panels are manufactured using an<br />
extremely high level of precision technology; however,<br />
sometimes some parts of the screen may be missing<br />
picture elements or have luminous spots. This is not a sign<br />
of a malfunction.<br />
Make sure the television is located in a position where it<br />
cannot be pushed or hit by objects, as pressure will break<br />
or damage the screen. Also, please be certain that small<br />
items cannot be inserted into slots or openings in the case.<br />
‘P’ Clip<br />
Fixing strap<br />
Fixing strap<br />
Sturdy tie (as short as possible)<br />
Stand clip<br />
Screw<br />
(supplied)<br />
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.<br />
Studies indicate that plastics may weaken and crack over time from the combination effects of<br />
chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could<br />
result in serious injury and/or permanent damage to TV and TV pedestal.<br />
When using a Wall Bracket<br />
Please use a wall bracket appropriate for the size Removing the Pedestal Stand:<br />
and weight of the LCD TV.<br />
1 Carefully lay the front of the unit face down on a<br />
• Two people are required for installation.<br />
flat, cushioned surface such as a quilt or blanket.<br />
• To install a wall-mount from another manufacturer, Leave the stand protruding over the edge of the<br />
use the SPACERS (supplied).<br />
surface.<br />
1 Unplug and remove any cables and/or other<br />
component connectors from the rear of the TV.<br />
2 Carefully lay the front of the unit face down on a<br />
flat, cushioned surface such as a quilt or blanket.<br />
3 Follow the instructions provided with your<br />
wall bracket. Before proceeding, make sure<br />
the appropriate bracket(s) are attached to the<br />
wall and the back of the TV as described in the<br />
instructions provided with the wall bracket.<br />
4 Make sure to place the spacers supplied between<br />
the bracket and the back of the TV.<br />
5 Always use the screws supplied or recommended<br />
by the wall mount manufacturer.<br />
28–32mm<br />
M8<br />
Stand style is dependent on model<br />
NOTE: Extreme care should always be used when<br />
removing the pedestal stand to avoid damage to<br />
the LCD panel.<br />
2 Remove the four screws.<br />
Four screws<br />
3 Once you have removed all four screws holding<br />
the pedestal stand in place, remove the pedestal<br />
stand from the TV by sliding the pedestal stand<br />
away from the TV.<br />
Screw<br />
Wall bracket<br />
Spacer (supplied)<br />
TV back panel<br />
Place four spacers (supplied).<br />
CAUTION: The diameter and length of the screws differ<br />
depending on wall bracket model. Use of screws other<br />
than the screws specified may result in internal damage<br />
to the TV set or cause it to fall, etc.<br />
6
Change language