Operators manual for the 645 decode - UEC Technologies

Decoder, TV (SCART or RF Interfaces), Hi-Fi
1 Switch off the mains supply to the decoder before connecting or
disconnecting the LNB. Connect the terrestrial antenna
connector to the RF IN socket on the decoder.
2 Connect a flylead between the variable stereo sound outputs on
the decoder and the audio inputs on the Hi-Fi.
4 Using a SCART-to-SCART cable (not supplied), connect the
TV SCART socket on the decoder to the SCART socket on the TV.
5 If the TV does not have a SCART socket, use the supplied flylead to
connect the RF OUT connector on the decoder to the RF IN
connector on the TV.
3 Connect the coaxial cable connector from the LNB on the satellite
dish into the connector marked LNB IN on the decoder. The
connector on the coaxial cable to the decoder should be finger
tight.
10 OPERATING INSTRUCTIONS DSD 645