04.10.2014 Views

Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CDMA Analyzer<br />

Optional CDMA Tx Analyzer <strong>Measurement</strong> Settings<br />

Optional CDMA Tx Analyzer <strong>Measurement</strong> Settings<br />

You can change several optional measurement parameters in the CDMA Tx<br />

Analyzer:<br />

• “Setting the Channel or Frequency Step” on page 188<br />

• “Setting the PN Increment” on page 189<br />

• “Setting the CDMA Transmitter Reference Level” on page 191<br />

• “Setting the Active Channel Threshold Level and Auto Threshold Level” on<br />

page 192<br />

• “Setting <strong>Measurement</strong> Time” on page 193<br />

• “Setting Quick Page Channel” on page 194<br />

• “Setting Average, Sweep, and Restart” on page 195<br />

• “Adding a Marker” on page 196<br />

• “Setting the Pass/Fail Limits” on page 198<br />

Setting the Channel or Frequency Step<br />

You can set the channel or frequency step so you can quickly increment to the next<br />

channel or frequency using the up and down arrow buttons.<br />

Step<br />

Notes<br />

CDMA Analyzer<br />

1. [Chan Step] or [Freq<br />

Step]<br />

2. Enter the desired<br />

channel or frequency<br />

step using the numeric<br />

keypad.<br />

This choice depends on the [Units] mode you are<br />

using.<br />

3. [Enter] Notice (and verify) that the number you entered<br />

(the channel step number or the frequency step<br />

number) appears below the Chan Step or Freq Step<br />

text on the corresponding button.<br />

188 Chapter 7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!