Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

Safety and Regulatory Information and Specifications
Safety considerations
Safety considerations
Safety and Regulatory Information
and Specifications
General
This product and related documentation must be reviewed for familiarization with
safety markings and instructions before operation.
This product has been designed and tested in accordance with IEC Publication
61010-1+A1+A2:1992 Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use and has been supplied in a safe
condition. This instruction documentation contains information and warnings which
must be followed by the user to ensure safe operation and to maintain the product in
a safe condition.
Safety Earth Ground
A uninterruptible safety earth ground must be provided from the main power source
to the product input wiring terminals, power cord, or supplied power cord set.
Chassis Ground Terminal
To prevent a potential shock hazard, always connect the rear-panel chassis ground
terminal to earth ground when operating this test set from a dc power source.
Safety Symbols
!
Indicates test set damage can occur if indicated operating limits are
exceeded. Refer to the instructions in this guide.
Indicates hazardous voltages.
Indicates earth (ground) terminal
WARNING
A WARNING note denotes a hazard. It calls attention to a procedure, practice,
or the like, which, if not correctly performed or adhered to, could result in
personal injury. Do not proceed beyond a WARNING sign until the indicated
610 Chapter 21