04.10.2014 Views

Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

Measurement Guide Agilent Technologies E7495A/B - TRS-RenTelco

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Getting Started<br />

Your First 15 Minutes with the <strong>E7495A</strong>/B<br />

Install a Battery<br />

Getting Started<br />

Step<br />

Notes<br />

1 Open the battery door. Turn the latch counterclockwise several<br />

times until loose. Then pull the battery door<br />

open.<br />

2 Insert the battery. Insert one or two batteries.<br />

3 Close the battery door. Turn the latch clockwise until tight to<br />

secure the battery door.<br />

For more information about the batteries, including battery installation and removal,<br />

refer to Chapter 6 , “Working with Batteries.”<br />

Practice Using the Three-way Power Button<br />

The <strong>E7495A</strong>/B Test Set power button is designed to provide additional convenience<br />

when you want to pause between measurements, then quickly start again. Besides<br />

Chapter 1 37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!