excavation ,backfilling & site works - UNDP

CONSULTANT:
BILLS OF QUANTITIES -
DATE:APR.2008
BILL No. 7 INTERNAL FINISHES - CARPENTRY AND JOINERY WORKS (SEC- 03)
ITEM
NO.
DESCRIPTION UNIT QUANTITY
(SECTION NO. ' 3 ‘)
INTERNAL FINISHES.
CARPENTRY AND JOINERY WORKS
Sizes of carpentry works given in the Bills of Quantities
are skeleton sizes and shall be as per Drawings.
RATE
AMOUNT
US$ CENT US$ CENT
Sizes of doors and other items mentioned in the Bills of
Quantities shall allow for tolerance to suit the structural
openings shown in the Drawings:
Wooden doors and pair of doors shall be measured in
number for each structural opening, unless stated
otherwise in the Bills of Quantities.
Rates for carpentry and joinery work shall include:
a) Shop and coordinated drawings..
b) Allowance for plastering and tiling and the like.
c) Cutting and fitting around obstructions, Bedding and
painting.
d) Grounds, blocking and backings.
e) Plugging concrete, block work, and stonework, and
making well ,frame insulation beneath tiles
f) Ironmonger including wally cylindrical locks ,wally or
wqual handles stoppers, screws, temporary fixing, refixing,
oiling and adjusting.
g)Providing 3 keys for each lock including tagging.
h) Glass and glazing including cutting to size and putty.
i)Preparing surfaces to receive finishes.
j) Painting, varnishing, polishing, oiling, and the like, to
any area or width in any location including work in
multicolor and cutting in edges and putty.
Page 16