22.10.2014 Views

Modified Part 2 Tender Document - Naya Raipur

Modified Part 2 Tender Document - Naya Raipur

Modified Part 2 Tender Document - Naya Raipur

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

NRDA F-1-Schedule-D- Section-II – SCOPE OF WORK<br />

Construction of Forest and Water Resources Department Buildings at Sector-19 of <strong>Naya</strong> <strong>Raipur</strong><br />

NRDA<br />

V. HVAC<br />

The general character and the scope of work to be carried out under this contract<br />

are illustrated in Drawings, Specifications and Schedule of Quantities. The Contractor<br />

shall carry out and complete the said work under this contract in every respect in<br />

conformity with the contract documents and with the direction of and to the<br />

satisfaction of the Engineer in charge. The contractor shall furnish all labour,<br />

materials and equipment (except those to be supplied by the Owner) as listed under<br />

Schedule of Quantities and specified otherwise, transportation and incidental<br />

necessary for supply, installation, testing and commissioning of the complete air<br />

conditioning system as described in the Specifications and as shown on the<br />

drawings. This also includes any material, equipment, appliances and incidental<br />

work not specifically mentioned herein or noted on the Drawings / <strong>Document</strong>s as<br />

being furnished or installed, but which are necessary and customary to be<br />

performed under this contract. The central Heating, Ventilation and Air-Conditioning<br />

(HVAC) system shall comprise of following:<br />

a. VRV Systems<br />

b. Air-cooling system<br />

c. Indoor units<br />

d. Motor control centres, Wiring and ear thing from MCC panels to various air<br />

conditioning equipment, control wiring and interlocking.<br />

e. Refrigerant & condensate drain piping inclusive of all valves and fittings.<br />

f. Sheet metal ducts inclusive of external insulation, acoustic lining, canvas<br />

connections, volume control dampers and smoke dampers as required,<br />

Supply and return air registers and diffusers.<br />

g. Insulation of pipes ducts.<br />

h. Automatic controls and instruments.<br />

i. Vibration isolators for all HVAC equipment.<br />

j. Wiring and ear thing from MCC panels to various refrigeration, air<br />

conditioning and mechanical ventilation equipment, control wiring and<br />

interlocking.<br />

k. Balancing, testing and commissioning of the entire HVAC and mechanical<br />

ventilation installation.<br />

l. Test reports, list of recommended spares, as-installed drawings, operation<br />

and maintenance manual for the entire HVAC installation.<br />

m. Training of Customer’s Staff.<br />

12. Project Execution and Management: The Contractor shall ensure that senior planning<br />

and erection personnel from his organization are assigned exclusively for this project.<br />

They shall have minimum experience in this type of installation as detailed in the<br />

document. The Contractor shall appoint one Project manager. He shall be assisted on<br />

full time basis by erection engineers & supervisors. The entire staff shall be posted at<br />

site on full time basis.<br />

The project management shall be through modern technique. The Contractor’s office at<br />

site shall be fully equipped with fax, modem, computers, plotter etc. Erection engineer<br />

and supervisors shall be provided with mobile communication system so that they can<br />

always be reached.<br />

Signature of Contractor……………………………....<br />

Signature of NRDA………………………..…………<br />

Page 6 of 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!