April - The Monty Heat Treat News

systems all to be located with the same manufacturer in the Midwest region of the
United States. This ModulTherm system operates using recipe selectable Helium or
Nitrogen high pressure gas (up to 20 bar) for quench and incorporates pre-wash,
pre-oxidation, convection heating and tempering in a fully automated, lights-out
system. When helium quench is selected, it is captured and reclaimed at the rate of
99.5% per quench. Equipped with Dynamic-Quenching® and multi-directional
quench gas control, this system provides the best possibilities for control of work
piece distortion. Large, complex system installation and commissioning is routine
for ALD-Holcroft. Their experienced staff takes on these challenges with skill and
careful execution. This NAFTA limited company has evolved into a world class
supplier of the world’s leading vacuum carburizing technologies.
ALD-Holcroft manufactures vacuum-based thermal processing systems for the
United States,Canada, and Mexico. Products include ModulTherm®,
SyncroTherm®, MonoTherm® and DualTherm® vacuum furnace systems. For
additional information on our vacuum based product offerings call ALDHolcroft
Vacuum Technologies Co., Inc. at (248) 668-4130, or visit its website at www.aldholcroft.com."
March 6/2013
Souderton, PA. 3/5/13 - "Solar Manufacturing Inc. announces the expansion of
its office and manufacturing facilities with the addition of 22,000 square feet in a
building on 192 Keystone Drive, Telford, Pennsylvania. This new addition is
approximately two miles from the current Solar Manufacturing corporate facility.
Phase one of the expansion is complete with 10,000 square feet of manufacturing
space and 1,000 square feet of office space successfully refurbished and in full
manufacturing operation. Phase two of the expansion, which will add an additional
10,000 square feet of manufacturing and 1,000 square feet of office space, will be
completed and operational by mid-summer. James Nagy, president of Solar
Manufacturing states, “This new building is the perfect complement to our original
50,000 square foot facility. Our primary need for increased space is to
accommodate our growing hot zone rebuild business. The new facility will also be
used for the fabrication and assembly of the electrical cabinets used on our
furnaces. Eventually, we will assemble and manufacture the smaller furnaces of our
overall vacuum furnace product line there as well.”
ABOUT SOLAR MANUFACTURING; Solar Manufacturing designs and
manufactures all types of vacuum heat treating and brazing furnaces and offers
replacement hot zone and spare parts for various vacuum furnace brands. To learn
more about Solar Manufacturing’s diverse product line and services, contact Pete
Reh, VP of Sales, at 267-384-5040 x 1509 or pkr@solarmfg.com. Additional
information can be found on our web site – www.solarmfg.com"March 6/2013
www.themonty.com