Download - Dönges

Drive-over ramps
2
Tools
Usage options:
All-rubber drive-over ramp Turtle
Tools
Drive-over ramp for cars, lorries and other
vehicles (kerbs, railway crossings, pavements,
thresholds etc.).
Drive-over ramp for the private sector.
(cellar thresholds, wheelchair access, stairs etc).
The new TURTLE drive-over ramp is extremely robust
and resistant. The knobs that are fitted as standard
prevent the individual ramps from falling apart when
they are assembled. With two reflective strips for
optimum visual detection during the day and at night.
The all-rubber drive-over ramps are assembled in
seconds, weatherproof and rot-proof.
Supplied without
crate
Technical data:
Length:
330 mm
Wide ramp:
300 mm per section
Width including knobs: 368 mm per section
Height:
95 mm
Material:
All-rubber
Load capacity: 30 t
Order no.
Weight kg
211719 4,8
Drive-over plank DIN 14854
Made from hard wood, with bevelled corners and galvanised
metal protection, two hand recesses on the
underside for carrying.
Order no. Width x Height x Length mm Weight kg
211720 1000 x 400 x 50 10,5
Sand ladder
Made from aluminium, for driving on loose soil or for
extracting a stuck vehicle. Also perfect for ice,
snow and mud.
Well-known from the expedition and rally area,
the sand plate also does a good job in the fire service.
The hooks on the sides allow several plates to be
assembled into a solid unit.
Complies with requirements of DIN 14555-T3
(equipment vehicle loading).
Order no. Length x Width mm Weight kg
218080 1500 x 400 4,0
Quality since 1903
178
www.doenges-rs.de