Download - Dönges

Personal equipment
Zip fastener:
Gas and water-tight zip fastener,
coated with PVC, horizontally
positioned on rear of suit to make
the suit easier to put on and take
off. The zip fastener is also
protected by an external overlap.
1
Filter for Scott Proflow
Decontamination suit
Combination filter for use with the Scott Proflow 2 SC
for providing protection from particles and all gasses
and vapours. If there is any uncertainty about the
composition of the hazardous material, always use a
combination filter. This filter provides protection from
organic, inorganic and acidic gasses, vapours and
ammonia, solid and liquid particles, radioactive and
highly toxic particles, bacteria and viruses
Personal equipment
Classification: A2B2E2K2 – P3 (EN 14387:2004)
ABEK-P SL (EN12941 / 12942)
Two filters are required to operate the fan.
Order no.
Weight g
256042 440
Overpressure
valve
Gloves:
The suit is equipped with latex cuffs for
pleasant wearing comfort and the possibility of
wearing various gloves (depending on purpose
of use).
The cuffs can be adapted to the user by
shortening.
Gloves made from PVC, chloroprene, rubber,
nitrile or combinations thereof are recommended.
Overpressure valves:
The suit is equipped with a total of 4 overpressure
valves that are protected from water
penetration.
Boots:
The suit is equipped with PVC safety boots,
size 46, tested in acc. with
EN 345 S5.
Air supply:
The air supply system consists of:
Breathing air hose connected to Blower
Air channels inside the hood that allow
fresh air to flow against the face mask.
Two inlets for screwing the filter to
the fan on the inside from the outside
parts.
+49 (0) 21 91 / 56 26 - 112
65